The new V100 VersaLock Jaws and inserts are much more capable of holding larger and heavier pieces of work. They start with a 100mm base jaw, double the V50 base jaw and there is a useful selection of jaw inserts to suit multiple scenarios.
The jaws will fit on the Record Power Victory, SC4 & SC3 chucks. In addition that can also be mounted onto the Robert Sorby Patriot and NOVA G3 & SuperNova 2 chucks.
The 3 package deals including the Victory chuck and the new V100 jaws are for M33, M33 ASR and 1 1/4" x 8tpi spindles.
Record Power supply Victory chucks as an M33 and M33 (ASR) version. Which one should I use for my M33 threaded lathe?
If your lathe has an M33 x 3.5 tpi spindle then the standard M33 x 3.5 tpi chuck is perfect for you.
If you have an ASR compatible spindle (identified by a groove at the back of the spindle nose thread, then use the M33 (ASR) version chuck. Please note that ASR locking rings are not supplied.
Can I use the ASR version on a standard M33 spindle without the groove?
Yes as there is a threaded hole In the ASR spigot to allow a grubscrew to be fitted to lock the chuck on to the spindle for safety.
